AISI 316Ti - X6CrNiMoTi17-12-2 - DIN 1.4571
316Ti grade contains a small amount of Titanium (Ti), which is around %0,5. The advantage of 316Ti grade over the other two grades (316 - 316L) is, it keeps its strength under increasing tempatures.
Machinibility is possible with the right tools, but it is more difficult than 304. Cold forming is good. Weldability is good.
With the addition of Molybdenum (Mo) and Titanium (Ti), corrosion resistance is superior. There is no sign of rusting uu to 900 °C degree. They are resistant to oxidising and wet chloride environments.
Alternative grades: AISI 316L
Available forms: Round Bars, Flat Bars, Hexagon Bars, Square Bars, Angles, Wires, Special Profiles, Coils, Sheets, Strips, Welded Tubes, Seamless Tubes, Profiles, Wire Mesh
Available forms in our stocks: Round Bars, Flat Bars, Coils, Sheets, Strips
CHEMICAL COMPOSITION:
|
Grade |
C |
Mn |
Si |
P |
S |
Cr |
Mo |
Ni |
Ti |
|
|
316Ti |
min. max. |
- 0.08 |
- 2.0 |
- 0.75 |
- 0.045 |
- 0.03 |
16.5 18.5 |
2.0 3.0 |
10.0 14.0 |
- 0.50 |
MECHANICAL PROPERTIES:
|
Grade |
Tensile Strength |
Yield Strength |
Elongation |
Hardness |
|
|
Rockwell |
Brinell |
||||
|
316Ti |
515 |
205 |
40 |
95 |
217 |
PHYSICAL PROPERTIES:
|
Grade |
Density |
Modulus of |
Coeff. of |
Specific Thermal |
Specific Heat |
Electrical |
|||
|
0-100 |
0-315 |
0-538 |
At |
At |
|||||
|
316Ti |
8000 |
193 |
15.9 |
16.2 |
17.5 |
16.3 |
21.5 |
500 |
740 |
Given data is based on theoritical vaules and intended as informative purposes only. Given data may be revised at any time without prior notice. Stainless steels may vary in performance under different circumstances. Teknik Metal Endustri Malz. Tic. Ve San. A.S. disclaims any and every liability, and will not be held responsible for any consequences derived from the end use or the application of the materials.